Automotive Ethernet is becoming the serial data backbone of choice for faster data communication to enable advanced ADAS, infotainment, connected car, and autonomous vehicle technologies. Join Teledyne LeCroy for this 4-part webinar series covering everything about automotive ethernet (BroadR-Reach, 10Base-T1S, 100Base-T1, and 1000Base-T1) testing.Register Here
In this session, we will focus on the fundamentals of the Automotive Ethernet ecosystem, including a brief history and evolution of the standard, an overview of benefits of the new technology, and the associated design challenges. We will conclude with an introduction into the test requirements and the analysis tools available to help troubleshoot and qualify designs.
In this session, we will focus on the reflection measurements MDI return loss and MDI mode conversion loss. We will review the basic concepts of the S-parameters and their meaning in single-ended and mixed-mode forms with particular reference to the single-balanced twisted pair. We’ll follow with a measurement demonstration.
In this session, we will describe the requirements for physical media attachment (PMA) compliance tests, the measurement setup required, the accessories needed, and demonstrate the procedures for obtaining the best measurement results and signal integrity.
In this session, we will look at Automotive Ethernet link communication and explore how to debug and troubleshoot both Point-to-Point and Multidrop architectures using an oscilloscope and analyzing both the physical and protocol layers.
Registration for the live webinars will close 5 working days prior to the air date. Those registering after this date will be notified when the webinar is available on-demand and will be able to access it there.