When: Tues., July 30, 2019
Time: 10:00AM - 1:00PM
Where: Teledyne LeCroy
765 Sycamore Dr
Milpitas, CA 95035
Embedded system control busses enable communication between sensors, actuators, devices, etc. using well defined protocols. These protocols are deployed using electrical, optical, or wireless signaling. As the amount of data being transferred is rapidly increasing, control busses are evolving to meet the new demands.
In this class you will learn how to use an oscilloscope to trigger, decode and confirm the PHY-Layer signal integrity of embedded serial data buses. This information will help you understand what they tell us about the embedded system operation.
We will review I2C, SPI, UART, CAN, CAN FD, LIN, BroadR-Reach - Automotive Ethernet, and SENT. We will include details on measurement of signal faults, bus loads for specific nodes, gateway timing, locating error frames, symbolic decoding, extracting and plotting embedded traffic, jitter analysis and advanced techniques for finding anomalies. This will be a workshop with hands on time to apply what you have learned.
Cost: FREE, registration is required to hold your seat.
Presenter: Mark Graumlich
Sr. Field Applications Engineer at Teledyne LeCroy
Register for the Seminar
Validating & Troubleshooting Embedded Serial Data Buses, With Hands-On Lab
PLEASE NOTE: All visitors must provide valid government photo identification prior to gaining access to a Teledyne facility. This can be in the form of a driver's license or passport.