Available On-Demand
Join Eric Bogatin and Teledyne LeCroy as we introduce you to five simple, yet essential, principles of signal integrity which we will apply to understanding how to interpret oscilloscope measurements from DC to 1 GHz bandwidth.
Available On-Demand
In this webinar, we’ll see a simple, straightforward way of quickly measuring the system bandwidth using a Noisecom wideband white noise source. With this method, we’ll look at the bandwidths of both the oscilloscope and of passive probes like a 10x probe, coax cables, and active probes.
Available On-Demand
Switching noise is the most common source of noise in all digital circuits. In this webinar Prof. Eric Bogatin will show you 3 design principles that can dramatically reduce switching noise.
Available On-Demand
Learn how to identify the types of grounds in your product and how to avoid common measurement artifacts with Prof. Eric Bogatin.
Available On-Demand
In this webinar, Eric will show how accurate, high bandwidth measurements of power rail voltages are sensitive to artifacts and how to overcome them so you can get a more accurate and realistic measure of your power rails.
Available On-Demand
Join Professor Eric Bogatin and Teledyne LeCroy and learn what information can be obtained from a TDR and VNA and how to choose the right tool for your application.
Available On-Demand
Join Eric Bogatin for this webinar as he describes best measurement and analysis practices for signals in the time and frequency domains.
Available On-Demand
In this webinar, Professor Eric Bogatin describes three common design features to avoid to reduce EMI problems and demonstrate pre-compliance tests that will identify problems before you submit your product for an expensive EMI compliance test.
